Designed to be safe, fast and effective, even on tough terrain, the "Tornado" cable blowing machine will move fiber optic cable of 0.23 to 1.25 in. (5.84-32 mm) diameter at speeds to 300 ft./min. (90 m/min.) into pre-installed innerduct or direct-buried duct. It can accommodate innerduct from 1 to 2.48 in. (25-63 mm). A conversion kit allows the Tornado to place either 12/10 mm or 10/8 mm micro duct into the innerduct.

This machine is capable of blowing micro fiber optic cables from 2.5 mm to 8 mm in diameter in micro ducts (AKA micro tubes) ranging from 5.0 mm to 12 mm diameter.  This machine gets good reviews every time it's used.  It is popular with the contractors who own them.  Contractors are seeking to obtain the Breeze machine mainly because it is so price competitive.

The fusion splicer kit P6-72A is the high-end model. Outstanding features of this
fusion splicer are the 9s precise and fast splicing and small size and its core-to-core
alignment. Due to its compact design, to the wide range of accessories and power
options the fusion splicer can be adapted to all common requirements.

1. Fiber Optical Stripper Standard A/B Peel off fiber coating
2. Tubing Cutter Standard A/B Portrait, Landscape orientation peel cable
3. Utility Knife Standard A/B Incise thing

These pigtail cables are manufactured using Low Loss 200 cable that provides a higher performance cable with excellent flexibility. All cables are completely assembled, tested and include a heat shrink weather tight seal on both cable connectors. Be sure to weatherproof all outdoor exposed connections.

Fiber optic patch cord is one of most commonly used components in fiber optic network. fiber optic patch cords sometimes is also called fiber optic jumper or fiber optic patch cables. generally there are two types of fiber optic patch cords: single mode fiber optic patch cords and multimode fiber optic patch cords. here the word mode means the transmitting mode of the fiber optic light in the fiber optic cable core. usually single mode fiber optic patch cord are with 9/125 fiber glass and is yellow jacket color, multi mode fiber optic patch cord are with 50/125 or 62.5/125 fiber glass and is orange color.

Features
`58; Muti cable entry points
`58; Integrated heatshrink splice holder
`58; Holds up to 4 single Fibres
`58; Integrated fibre management
`58; Integrated Shutter
`58; Intergrated shutter protects against lazer exposure and dust

Fiber OPtic  Distribution Caserack mounted ODF

Fiber optic splice sleeves are used on fiber glass joint point during the fiber optic fusion work, usually is after the fibers are melt, people use this splice protection tube on the melt point for further protection, its strengthen member inside the tube will make the fiber joint point stronger and it provide extra protection to the fiber joint point after the fiber optic fusion- it is waterproof and dust proof, and using such splice protection sleeves can reduce possible extra attenuations.

There are Single mode fiber optic connector and Multimode fiber optic connector, Single mode fiber optic connectors can be with PC, or UPC or APC polish, while Multimode fiber optic connectors only with PC or UPC polish. PC or UPC or APC refer to how we polish the ferrule of the fiber optic connectors. Judging from the out looking, Multimode connectors are usually with black boot or beige color, Single mode PC and UPC ones are usually with blue or black color, Single mode APC is with green color. Insertion loss is important technical data of the fiber optic connectors. The smaller the better. APC insertion loss is smaller than UPC, UPC is smaller than PC.

Hybrid fiber optic adaptors:
SC to ST hybrid fiber optic adapters:
SC to ST hybrid fiber optic adaptors are all with plastic housing, flange type, with zirconia sleeve for single mode and bronze sleeve for multimode. Blue for single mode PC and beige for multimode PC.
FC to ST hybrid fiber optic adapters:
FC to ST hybrid fiber optic adaptors are also flange type with plastic housing, colors and sleeves same as SC to ST adaptors.
SC to FC hybrid fiber optic adapters:
SC to FC hybrid fiber optic adaptors are available with both plastic housing type and metal housing type, plastic body adaptors are flange type and metal housing adaptors are square type.
SC to LC hybrid fiber optic adapters:
SC to LC hybrid fiber optic adaptors are flanged type with plastic housing, both single mode and multi mode adaptors are with zirconia sleeves.

Wide range variable & inline fiber optic attenuator
the inline fiber optic attenuator are with more accurate attenuation compared with traditional connector type fiber optic attenuators. what is more ,this fiber optic attenuator is with a precision screw set, by turing it ,the attenuation range can be varied. and this fiber optical attenuator can be with various terminations on the each side of the cable.